5 Ghost Autowatch Immobiliser Tips From The Pros
Autowatch Ghost Immobiliser
The renowned Ghost Immobiliser provides your vehicle with a high level of protection against key cloning hacking, theft and hacking. This TASSA-certified system is not detected by thieves and prevents your vehicle from starting.
auto ghost immobiliser is silent and uses buttons that are located on the steering wheel, center console, and door panels of your vehicle. It allows you to create a unique PIN code up to 20 characters long that must be entered before the car will start.
Easy to install
It is more crucial than ever to protect your vehicle. With car crime increasing and cloning tools readily available, it's essential to protect your vehicle. Our Autowatch Ghost immobiliser provides a discreet, effective and aftermarket solution to protect against key cloning and car theft. It is virtually undetectable to thieves and operates through buttons on the steering wheel or door panels, as well as the central console. This allows users to create an individual disarm sequence like credit cards, which have to be completed before the vehicle can begin or be driven away. This makes the system nearly impossible to identify and is also unaffected by spoofing or jamming devices that are used in other systems on the market.
Installation of the Ghost unit requires a highly-skilled installer. The unit is carefully integrated into the CAN bus system of your vehicle and is able to communicate directly with the ECU. This allows the Ghost to be installed without changing factory settings and ensures that it cannot be bypassed by a criminal using signal boosters or other methods.
After the Ghost is fitted with a new and improved sequence to disarm must be entered to activate your vehicle. Press the service button five times in 2 seconds, but ensure you don't hold it down for too long. The system will then flash twice to show that Transport Mode has been activated. This feature is great for classic, sports & high-end vehicles that require to have their security system temporarily disabled during transport or servicing.
When Transport Mode is activated your immobiliser will become disabled and you are unable to activate it again by entering the PIN code. This feature is great for those who wish to store their vehicle over winter, preventing it from being stolen by thieves, or being liable for monthly insurance premium increases.
There are no key-fobs, LEDs or other indicators to reveal its location
The Ghost immobiliser protects your car from thieves pressing buttons on the steering wheel or dashboard. You can enter a pin code without being noticed before starting the engine. It prevents signal relay attacks, ECU swapping and key cloning and can be linked to a smartphone app to arm/disarm remotely. It's simple to install, and is able to be fitted in a variety of vehicles. It's also very discreet and can be concealed in difficult-to-access places, such as behind the dashboard, or in the trim of the steering wheel.
This is a great choice for vehicles with high performance since it will disable your vehicle's ignition if the wrong pin code has been entered. This will stop thieves from driving away with your pride and joy. The device can notify an iPhone if the vehicle is left unattended while in public. This gives you peace of mind while away from your vehicle.
Unlike other immobilisers, the Ghost doesn't require any extra fobs or LED indications and can be concealed easily in an unaccessible area in your vehicle. It works by directly communicating with the vehicle's CAN data network, which makes it highly resistant to detection. It doesn't emit radio signals, making it not detected by RF scanners, or signal jammers.
It is designed to be weatherproof and tamper-proof. It can also be able to withstand extreme temperatures. It's also not possible to interfere with by cutting the wires or dismantling the device. It is also undetectable by organized gangs of thieves that utilize diagnostics-reading devices to detect security systems. It is not affected by diagnostic equipment that analyzes the CAN data for the presence or absence of security systems.
No circuit cuts
The ghost device doesn't have any indicators with LEDs or key fobs that would indicate its whereabouts. It is hidden under the steering wheel or dashboard of your car and uses buttons to create a unique PIN sequence that needs to be entered to start the engine. This means that even if the person who stole your keys does have them, they can't drive the car away since they do not be aware of the correct PIN sequence. The device does not transmit radio signals meaning that organised gangs of thieves using diagnostics devices will not be able to detect the device.
This cutting edge immobiliser is also TASSA approved and can reduce your insurance premiums, especially for modified vehicles that have been customised by their owners. It also helps prevent key theft and ECU switching, meaning that the only possible method for a criminal to take your joy and happiness is to take it away. it.
Because the system does not use the factory key fobs or dashboard buttons, it is completely silent, it communicates with your ECU via the CAN data circuit, which is completely silent and doesn't even indicate that it's fitted. It means that a criminal would not be able to install new key fobs or even replace the ECU to cause your vehicle to start and therefore negates any other theft methods used in recent years such as key cloning, scans using radio frequency and code grabbing.
If you forget your PIN code Our engineers have provided you with a reset emergency for the device that allows you to enter "service mode". This allows a technician or dealer to temporarily drive and start your vehicle and perform maintenance work, MOTs or valet parking. When the technician is finished their task or you have collected your vehicle, simply enter the PIN code and the device will be out of service mode dependent on speed and duration.
No radio signals
The Ghost immobiliser, in contrast to other security systems for cars, does not rely on alarm systems or key fobs to block vehicles from getting started. It communicates instead with the vehicle's ECU, CAN data circuit and other circuits to stop the engine from starting. This makes it a discreet solution that is not affected by key cloning or radio frequency scanning techniques employed by thieves to bypass other security devices. It can be paired with tracking devices to enhance the security of your vehicle. You will also receive alerts if there is any attempt to steal or alter the security of your vehicle.
The Autowatch Ghost, a TASSA certified device, is an insurance-approved, and offers an excellent level of protection against key hacking and copying. It uses a mobile application to control the device and is encrypted to ensure security. It also comes with an emergency PIN code bypass. It is an effective cost-effective, discrete and discreet method to shield your car from theft.
However the Ghost is not without its issues. Users often have trouble entering the correct sequence to disarm. This is because the device requires input from buttons already in your vehicle, for example those on the steering wheel or on the centre console. This isn't easy for drivers to remember, or they might be wrong the first time. It is best to read the instruction manual that comes with the device and practice the disarming procedure prior to driving.
Another issue is that certain vehicles have issues with the CAN data connections, which could affect Ghost's performance. This could be due to faulty sensors or a damaged OBD port. It is recommended to check the system before using it in case the CAN connection is faulty.
Change your PIN code quickly
The Ghost is an excellent product that has become a huge hit on the market. However the process of changing the pin code can be a bit confusing. The device is programmed by the installer once it's fitted but sometimes customers might need to change this setting for a variety of reasons like they'd prefer an alternative button to disable the device, they don't want their installer to know or they just simply don't like their current pin number. It's simple to change your pin number. Follow the steps below to learn how.
It is important to note that you need to turn off the ignition but do not start your vehicle! The process only takes a few seconds to complete. The vehicle will then return to normal operation.